Assistance systems

• New digital cameras for demanding agricultural applications
• Higher resolution and better lighting adjustment
• Resistant to dust and high-pressure cleaners (IP6K9K)
• Simultaneous display of two camera images on the CCI 1200 (1x Maxiview, 1x Miniview)

The new robust digital cameras are used for field of view and process monitoring especially for agricultural applications. This optimises process reliability, as important areas of the machine, such as the bale transfer, can be viewed. and also view dead angles during road travel for improved safety. Can be perfectly combined with the CCI terminals or the 7" monitor – to ensure perfect control in every situation.

On the CCI 1200 (from HW 2.0), two camera images can be displayed at the same time (1x Maxiview, 1x Miniview) in addition to the machine operation. The digital cameras are connected to the terminal via an Ethernet connection.

The digital camera incorporates the latest sensor technology. The automotive-qualified image processor of the latest generation achieves very high image resolution. This is achieved even under challenging ambient conditions, such as dusk or backlight. With certification for resistance to dust and high-pressure cleaners and the sturdy housing, these cameras were specially developed for demanding agricultural applications.

As an alternative to the CCI terminals, the 7" touchscreen monitor is a convenient solution to use digital camera systems on all ­KRONE machines. Up to four camera images can be displayed simultaneously via the split screen, providing the perfect overview, increasing safety and ensuring accurate control during operation of the complete system.

A DLG-certified camera system is available as an option for all EasyCut F front mounted mowers without an A-frame. The system is DLG certified and offers two views on the same screen for improved visibility in awkward situations. For example, narrow field gates are now easily managed without a helper. The package comprises two cameras, the display screen and the necessary wiring.

On the BiG M and BiG X self-propelled machines, the camera images are integrated into the operating terminal. When reversing, the terminal automatically shows the image on the terminal. With the BiG X, a camera can also be mounted on the spout.

• Using the full working width
• Increased efficiency
• Increased efficiency
• Maximum driver comfort

The ­KRONE GPS Guidance is specially designed to meet the needs of ­KRONE self-propelled machines. Thanks to the automatic steering, the GNSS receiver and the RTK correction signals, which are optionally received via the KSC, the self-propelled machines can drive over the area to be harvested with minimum overlap and true to track. For the driver, this means fatigue-free work and a high level of comfort.

With the ­KRONE GPS Guidance Plus, the BiG M processes an area fully automatically. Endless lanes are planned either in advance in the office or directly on the terminal in line with wildlife requirements. When the system is activated, the BiG M takes over steering, including automatic turning at the headland, as well as lifting the mower units in and out and speed regulation fully automatically. This allows the driver to concentrate fully on monitoring the process and surroundings.

Equipped with ­KRONE GPS Guidance, the BiG X can be steered comfortably and safely by autopilot. The use of GPS Guidance on the BiG X is particularly useful when harvesting whole crop silage. The driver can therefore concentrate fully on the work processes in the harvest fleet.

The ­KRONE GPS Guidance is operated either via the CCI 800 or CCI 1200 terminal. It is possible to choose between the EGNOS correction signal with about +-20 cm accuracy and the RTK correction signal with about +-2 cm accuracy.

• Lift and lower mowers and rotors automatically
• Maximum driver comfort
• Maximum efficiency
• Complete processing of the areas

Thanks to Section Control, the individual partial widths are switched automatically. This relieves the driver's workload and allows him to concentrate fully on the work processes of the machine. ­KRONE also offers complete systems including GNSS receivers, cables and terminals for the use of Section Control.

With the aid of Section Control, the individual mower units on the BiG M are automatically raised at the headland and lowered back into the working position. In this way, multiple processing of the mown crop is avoided to the benefit of forage quality and the driver's workload is once again significantly reduced.

Thanks to Section Control, the individual partial widths on the Swadro TC 1250 Pro, TC 1370 Pro, TC 1570 Pro, TC 2000 Pro and Swativo T 1040 are automatically controlled between working and headland positions. With the rakes it is possible to install the optional GNSS receiver directly on the frame. This means that tractors without their own GNSS receiver can also use the Section Control function on the rake.

The EasyCut B 880 CV/CR Collect, B 950 Collect, B 1000 CV/CR (Collect), B 1050 CV (Collect), B 1250 Fold and B 1250 CV Fold Collect mowers are available in conjunction with the Comfort electronics with Section Control. All partial widths automatically switch between headland and working position at the optimum time reducing operator strain and maximizing productivity.

On ­KRONE rakes and triple mowers, the partial widths can be switched via all ISOBUS terminals with Section Control. The control of the partial widths on the BiG M is taken over by the CCI 800 or CCI 1200 ISOBUS terminals with Section Control licence.

• With TIM, the implement controls the tractor
• Optimum sequence control reduces downtime and boosts efficiency
• Process consistency results in uniform bales
• Maximum driving comfort
• More bales per hour

The Tractor Implement Management system enables the implement to control the tractor. This reduces your workload as the driver and ensures optimum operator comfort. Furthermore, TIM reduces the downtimes of your machine thanks to the optimal sequence of the process steps. This increases the throughput and therefore the productivity of your machine. TIM is integrated as standard in all baler and wrapper combinations and VariPack Plus. Optionally TIM is available on all Comprima C and F as well as VariPack.

Thanks to TIM, your round baler is operated automatically. This optimised operating comfort reduces your workload as the driver. Furthermore, TIM keeps the efficiency of your machines at a high level, even on long working days.

When the baler signals that the target bale size has been reached, the tractor stops automatically. Then the net or film wrapping cycle is started automatically.

After the net is applied, the rear door opens, the bale is ejected, and the door closes. The only thing the operator has to do is pull off the tractor. This is a safety provision.

The optimal sequence of process steps shortens the machine's downtimes. increases throughput, and boosts machine productivity. TIM also enables even inexperienced operators to use the tractor and ­KRONE baler combination immediately with maximum productivity.

Thanks to the automatic sequence of the baling process, TIM gives you uniform and consistently dense bales.

Thanks to the automatic sequence of the baling process, the machine works continuously with optimum throughput. This reduces fuel consumption and costs per bale.