Comprima Plus

• „The round baler - Comprima F 155 XC Plus „
• The baler wrapper - Comprima CF 155 XC Plus „
• Flexible – choice of six bale sizes and 1.25-1.50 m Diameters
• „Cost-eff ective - the simple and uncluttered design

The Comprima F and CF Plus from KRONE are fixed chamber balers with semi-variable bale chambers. These machines produce high-density and well-shaped bales of six different diameters. Built from heavy-duty components they are extremely solid and sturdy. They are also very cost-effective and exceptionally easy to operate and service – thanks to their uncluttered build and design.

The Comprima F 155 XC Plus model produces 1.25-1.50 m diameter bales. Operators simply set the required diameter in 5 cm increments on an easy-to-use system. The semi-variable bale chamber produces a softer and very small core – also in large-diameter bales. This gives the bales a great density, helps them retain their shape and makes them heavier.

Three components are key to the semi-variable bale chamber: the tensioning arm, the suspension strut and the tensioning kinematics. The top tensioning arm is pulled down and as it does so, it increases the available space inside the chamber and allows more material to enter. The path of the tensioning arm is limited by a pin that is set on the outside of the machine. This defi nes the diameter of the bale.

The combination baler wrapper Comprima CF 155 XC Xtreme has all the features of the Comprima F X-treme plus a powerful wrapper with twin-arms which orbit at 36 rpm. The wrapping table forms a deep cradle and has big bobbins on the sides that ensure the bale is eff ectively rolled during the wrapping cycle even when the conditions are more than diffi cult. The table can also be used for depositing the bales in pairs.

After the bale chamber opens the bale is transferred to the wrapping table by a lever. Activated only after the gauge roller senses a high weight, this lever transfers the bale safely to the wrapping table.